39kw Pum System and Wind-Solar Hybrid Power Generation Controller
39kw Pum System and Wind-Solar Hybrid Power Generation Controller
Produktbeschreibung
products description
PWM Model Product Characteristics
1.The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users' technical requirements.
2.The big screen LCD display. Clearly present the working status of the wind turbine, solar panel, battery and controller.(Wind turbine voltage, current, power display ;solar voltage, current, power display, battery charging current, voltage, charging power, power display.)
3.Two sets of control systems:PWM constant voltage system and three-phase dump load system.
4.PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM's capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.
5.When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident.
6.When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.
7.The protection function of battery: polarity reverse protection, disconnection and damage protection.
8.Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.
9.Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage,it stops three-phase dump load to recharge battery automatically.
10.For the different wind turbine type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.
11.The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.
12.The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.
13.Optional communication Mode:RS232,RS485,GPRS,USB,RJ45 ect, Can monitor multiple devices running.
Off - Grid Wind Solar Controller 20KW-50KW
*Above parameter only for reference
1. Could be custom made to user specifications. 2, Could have solar power control subject to user demand.
Packaging & Shipping
Our Service
1.Reply inquiry in 24 hours.
2.Please kindly inform us which items you are interested & the reasonable price will be provided to you upon
receipt of your new inquiry ASAP.
3.Answer your question detailed.
4.Solved the problem with you during using our products.
5.Welcome to visit to our company and technology communication.
company information
Contact information
PWM Model Product Characteristics
1.The product is manufactured according the JB/T6939.1-2004 industrial standard and GB/T 19115.1-2003 national standard also with users' technical requirements.
2.The big screen LCD display. Clearly present the working status of the wind turbine, solar panel, battery and controller.(Wind turbine voltage, current, power display ;solar voltage, current, power display, battery charging current, voltage, charging power, power display.)
3.Two sets of control systems:PWM constant voltage system and three-phase dump load system.
4.PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM's capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.
5.When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident.
6.When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.
7.The protection function of battery: polarity reverse protection, disconnection and damage protection.
8.Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.
9.Auto recharging of battery: When the battery voltage reduces to 108% of the rated voltage,it stops three-phase dump load to recharge battery automatically.
10.For the different wind turbine type, the controller can be equipped with mechanical yawing, furled empennage, mechanical or hydraulic, pneumatic, electric magnetic and other brake functions.
11.The inside of the controller is equipped with surge arrester. Contain the over voltage into the wind turbine under the bearable voltage of the equipment or system. On the other way, to conduct the strong lightening current into the earth directly to avoid any damage of equipment.
12.The controller is equipped with manual three-phase dump load switch. To using this switch, the wind turbine will carry out three-phase dump load forcibly.
13.Optional communication Mode:RS232,RS485,GPRS,USB,RJ45 ect, Can monitor multiple devices running.
Off - Grid Wind Solar Controller 20KW-50KW
| Type | 26KW-420Vdc | 39KW-420Vdc | 65KW-420Vdc |
| Wind turbine rated power | 20KW | 30KW | 50KW |
| Wind turbine max. power | 40KW | 50KW | 80KW |
| Solar panel power | 6KW | 9KW | 15KW |
| Battery | 420Vdc | 420Vdc | 420Vdc |
| Function | Rectifier,charge, control | ||
| Display mode | LCD | ||
| Display content | Wind turbine voltage, wind turbine current, wind turbine power, solar panel voltage, solar panel current, solar panel power, battery voltage, charge current | ||
| PWM constant pressure voltage | >507Vdc | >507Vdc | >507Vdc |
| 3-phase load 1 voltage of the wind turbine | 520±5Vdc | 520±5Vdc | 515±5Vdc |
| 3-phase load 2 voltage of the wind turbine | 525±5Vdc | 525±5Vdc | 520±5Vdc |
| 3-phase load 3 voltage of the wind turbine | -------------- | ------------- | 525±5Vdc |
| Recovery charging voltage of the wind turbine | 475±5Vdc | 475±5Vdc | 475±5Vdc |
| Solar controller stop charging voltage | 520±5Vdc | 520±5Vdc | 520±5Vdc |
| Solar restore charge voltage | <507Vdc | <507Vdc | <507Vdc |
| Low-voltage of the battery | 350±5Vdc | 350±5Vdc | 350±5Vdc |
| Self-provided connecting wire of the 3-phase dump load | >6mm² | >10mm² | >16mm² |
| Self-provided connecting wire of the battery | >12mm² | >20mm² | >30mm² |
| PWM fuse | 63A | 80A | 100A |
| Solar fuse | 25A | 32A | 63A |
| Charging fuse | 100A | 125A | 160A |
| Work environment temperature | -30-60°C | ||
| Relative humidity | <90% No condensation | ||
| Noise (1m) | <40dB | ||
| Degree of protection | IP20(Indoor) | ||
| Cooling method | Forced air cooling | ||
| *Communication interface (optional) | RS485/USB/GPRS/Ethernet | ||
| *Temperature compensation (optional) | -4mv/°C/2V,-35°C~+80°C, Accuracy:±1°C | ||
| Size of the controller (mm) | 500*500*900 | 500*500*900 | 690*590*1300 |
| Weight of the controller | 50 Kg | 60 Kg | 120Kg |
| Size of the dump load (mm) | 690*450*1000 | 690*450*1000 690*450*530 | 690*450*1000 690*450*1000 |
| Weight of the dump load | 77Kg | 120 Kg | 160 Kg |
1. Could be custom made to user specifications. 2, Could have solar power control subject to user demand.
Packaging & Shipping
Our Service
1.Reply inquiry in 24 hours.
2.Please kindly inform us which items you are interested & the reasonable price will be provided to you upon
receipt of your new inquiry ASAP.
3.Answer your question detailed.
4.Solved the problem with you during using our products.
5.Welcome to visit to our company and technology communication.
company information
Contact information
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails:
>=1 Stück(e)
US 100.00-5000.00
Kommentare
Willkommen bei unzuun Kommentaren! Bitte halten Sie die Gespräche höflich und thematisch. Um produktive und respektvolle Gespräche zu fördern,
Sie können Kommentare von unseren Community Managern sehen.
Melden Sie sich an, um zu posten
Melden Sie sich an, um weitere Kommentare anzuzeigen
Diese Inserate könnten Sie auchinteressieren.
Meo Machinery Co.LTD
High-concentration photovoltaic CPV module
Meo Machinery Co.LTD
Solar Middle Clamp for Framed Solar Panel
Meo Machinery Co.LTD
Sunrover polycrystalline 430w 435w 440w 445w 450w solar panel bi facial
Meo Machinery Co.LTD
A grade wholesale price amerisolar 280w poly solar panel 280w
Meo Machinery Co.LTD
solar panel 48V 500w perc mono high efficiency PV Module 5BB
Meo Machinery Co.LTD
Factory Price CE Certificate Custom Mono 48v 330 300 Watt Solar Panel For House
Meo Machinery Co.LTD
Lovsun Renewable energy 5kw hybrid home solar panel system 5000w with battery charger
Meo Machinery Co.LTD
385W mono crystalline solar panel for 10kw 50kw 100kw 500kw 1mw on grid solar panel project cheap solar panel
Meo Machinery Co.LTD
Tier 1 Talesun 9BB perc mono half cell 405w 410w solar module market is popular and the price is favorable.
Meo Machinery Co.LTD
CHINT Astronergy 365-380w Solar Panel 150w 12v Kit Completo De Inversores Con Paneles Solares e Rikshaw With Panels Guyana
Meo Machinery Co.LTD
Yangtze Brand Monocrystalline 90W 100W 110W solar power panel for camping
Meo Machinery Co.LTD