Graphene lubricant additive chemical- Nano-ceramic Alloy Engine Wear Repair Agent NCB-2

Auto-repairing Fluid for Engine Wear

Technical Features:
A. Nanometer mineral materials are added to lubricating oil orlubricating grease. When the lubricating oil or grease is used, the mineral materials in it react with the surface of metal (iron, etc.) by force chemical reaction under the flash temperature of mechanical friction to produce ceramic alloy layer composed mainly of iron silicate, thus achieving the surface modification of metal.
B. The engine wear repair agent enters the friction surface along with the lubricating oil. It will repair the worn parts and generate a ceramic alloy layer on the friction surface. The original friction between metals will change to the friction between ceramic alloy layers. Thus the friction coefficient will be reduced to the most extent and the best fit clearance will be achieved.

Products Effects
1. Perfectly repairing: automatically repair machining defects and mechanical wear in dynamic, forming ceramic alloy surface
2.Fuel saving and power upgrading: Fuel saving and power upgrading by 8-20%.
3.Significant emission reduction: the emission of tail gas is reduced by more than 50%.
4.Extending the service life: To extend the service life of the engine by 1-3 times.
5.Long service life: To use it every 50,000-70,000 kilometers for private cars , 3000 – 4000 working hours for mechanical equipments.

Application Fields
All mechanical equipment with lubricating oil (grease) can use this product to repair wear and tear ! It can be widely used in the following industrial fields:
Transportation  Petroleum Equipments
 Power equipments Mining Equipments
 Engineering Machinary Mechanical Processing
 Military Equipments

The Use Method for Gasoline Engine and Diesel Engine
Replace engine oil and oil filter. Shake the Engine wear repair agent evenly, filling it from the engine oil hole. 100 ml is fit for 4 – 5 L lubricant oil. Start the engine, idle for 20 minutes, less than 80 km/h in the first one hour driving.

The Use Method for Mechanical Equipments
After replacing the machine with new lubricating oil, fill the product with 1% of the lubricating oil. Calculate the time to use the product next time according to the workload. In general, the cumulative work of 3,000-4,000 hours needs to be used again.

Models
A. For Petrol Engine
QAS ( for engine displacement ≤ 2.0 L )
QA ( for engine displacement ≤ 2.2 L )
QA2 ( for engine displacement 2.2 – 3.0 L )
B. For Diesel Engine
CA ( used in 4L lubricating oil)
CB ( used in 16L- 22L lubricating oil )
CB-2 (used in 22L - 28L lubricating oil )

Packing: Bottles in cartons. 100 ml or 200 ml in each bottle.

Shelf Life: 3 years in normal temperature preservation.

Vorlaufzeit:

Hafen:

Verpackungsdetails: