Multi-Purpose lubricant for drilling formdrill flow drill
Multi-Purpose lubricant for drilling formdrill flow drill
Produktbeschreibung
Product Show
Product Paramenters
Place of Origin | Belgium |
Type | Formdrill Flow drill |
Product name | Lubricant for formdrill |
Company Profile
Packing and transport
FAQ
1. who are we?
We are from Belgium, All the products are made in Belgium and Germany. We have office and agent all over the world. We can
supply you from Shanghai China or diretly from Belgium, our headquarters.
2. Which materials are suited?
- Steel up to 1100N/mm²
- Stainless Steel
- Copper
- Brass (max. 40% Zinc)
- Aluminium with less than 0.5%Si
- Most "exotic" alloys
3.What do I need for M8 in 2.0mm. wall thickness?
Required tools:
- FDMC2-TOOLHOLDER
- FD430E8-COLLET
- FD0730S-FORMDRILL
- FTM8-FORMTAP M8
- FDKSO-LUBRICANT FORMDRILL
- FTOIL-LUBRICANT FORMTAP
- REMARK: FOR A FLAT SURFACE USE A FD0730SF FLAT STYLE FORMDRILL
Machine parameters:
- Spindle speed: 2500 Rpm.
- Motor power: 1.5 Kw.
Check out our wizard page for more information about this and any other application.
4. What is the tool life of a Formdrill?
Tool life of a Formdrill is between 8.000 to 10.000 cycles in mild steel.
Tool life of a Formdrill is between 3.000 to 5.000 cycles in stainless steel.
5. Do I need special machinery?
No, Formdrill will work on any drill press with the appropriate spindle speed and motor power. See our manual section.
CNC-machines, milling machines or drill heads are suitable for the process.
6.Is there any lubrication necessary?
Yes, lubrication prevents the metal from welding to the tool. It increases signifantly the tool life of both Formdrill and
Formtap. Lubricating every 4 to 5 holes is sufficient in steel. In stainless steel we recommend strongly to lubricate every
hole.
Important: Never use conventional lubricants or cooling fluids for drilling or tapping.
7. Can Formdrill be used in a hand drill?
Our advise is no. The problem with a hand drill is lack of stability and axial force. It can only work for small diameters in
very thin work pieces.
8. What about galvanized material?
It depends the thickness and quality of the zinc layer. When very thin (3-5 micron) Formdrill will work. We advise a test in
our
lab.
9. Can I get a hole without the top collar?
The top collar is the result of material being drawn upward during the initial stage of the process. A Flat-style Formdrill is
available which will remove the top collar at the same time the bushing is formed.
10. Can I drill into solid material?
No, We need clearance on the back side of the work piece. As we are displacing the parent material we need room for the
material to flow.
11. Where does the insert come from?
The bushing (insert) is formed from the parent material. There are no additional components required or no material is added.
12. How strong are the formed threads?
Independent studies have showed that in most applications, thread strength exceeds industry standards both in pull out and
torque.
13. Can I use a normal machine tap (cutting tap)?
Yes but we advise not to. The Formdrill system is preserves the parent material. Using a machine tap would remove part of the
formed bushing. If a machine tap is used we advise to use a Long or Long/Flat Formdrill.
14. Doesn't the material get work hardened?
This depends on the material and carbon content. In steel alloys there is almost never a problem. Stainless steel may harden
about 10-15%, this causes no problem for the tapping afterwards.
15. Where does the heat come from?
All heat is generated through friction. There is no additional heat source.
16. What is the maximum material thickness?
This depends on the Formdrill diameter and style. For the larger diameters the wall thickness can go upto 10-12mm.
17. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
18.what can you buy from us?
formdrill,thermal drill,friction drill,flow drill
19. why should you buy from us not from other suppliers?
Formdrill, 40 years experience, expert in thermal drill. Create your own inserts. The thermal drilling system for screw,
solder and welding application in thin metal work pieces with high-strength holes, can be used in most ferrous and
non-ferrous metals
20. what services can we provide?
Accepted Delivery Terms: FOB,CIF,Express Delivery；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,Credit Card,PayPal,Cash;
Language Spoken:English,Chinese,German,French
We are from Belgium, All the products are made in Belgium and Germany. We have office and agent all over the world. We can
supply you from Shanghai China or diretly from Belgium, our headquarters.
2. Which materials are suited?
- Steel up to 1100N/mm²
- Stainless Steel
- Copper
- Brass (max. 40% Zinc)
- Aluminium with less than 0.5%Si
- Most "exotic" alloys
3.What do I need for M8 in 2.0mm. wall thickness?
Required tools:
- FDMC2-TOOLHOLDER
- FD430E8-COLLET
- FD0730S-FORMDRILL
- FTM8-FORMTAP M8
- FDKSO-LUBRICANT FORMDRILL
- FTOIL-LUBRICANT FORMTAP
- REMARK: FOR A FLAT SURFACE USE A FD0730SF FLAT STYLE FORMDRILL
Machine parameters:
- Spindle speed: 2500 Rpm.
- Motor power: 1.5 Kw.
Check out our wizard page for more information about this and any other application.
4. What is the tool life of a Formdrill?
Tool life of a Formdrill is between 8.000 to 10.000 cycles in mild steel.
Tool life of a Formdrill is between 3.000 to 5.000 cycles in stainless steel.
5. Do I need special machinery?
No, Formdrill will work on any drill press with the appropriate spindle speed and motor power. See our manual section.
CNC-machines, milling machines or drill heads are suitable for the process.
6.Is there any lubrication necessary?
Yes, lubrication prevents the metal from welding to the tool. It increases signifantly the tool life of both Formdrill and
Formtap. Lubricating every 4 to 5 holes is sufficient in steel. In stainless steel we recommend strongly to lubricate every
hole.
Important: Never use conventional lubricants or cooling fluids for drilling or tapping.
7. Can Formdrill be used in a hand drill?
Our advise is no. The problem with a hand drill is lack of stability and axial force. It can only work for small diameters in
very thin work pieces.
8. What about galvanized material?
It depends the thickness and quality of the zinc layer. When very thin (3-5 micron) Formdrill will work. We advise a test in
our
lab.
9. Can I get a hole without the top collar?
The top collar is the result of material being drawn upward during the initial stage of the process. A Flat-style Formdrill is
available which will remove the top collar at the same time the bushing is formed.
10. Can I drill into solid material?
No, We need clearance on the back side of the work piece. As we are displacing the parent material we need room for the
material to flow.
11. Where does the insert come from?
The bushing (insert) is formed from the parent material. There are no additional components required or no material is added.
12. How strong are the formed threads?
Independent studies have showed that in most applications, thread strength exceeds industry standards both in pull out and
torque.
13. Can I use a normal machine tap (cutting tap)?
Yes but we advise not to. The Formdrill system is preserves the parent material. Using a machine tap would remove part of the
formed bushing. If a machine tap is used we advise to use a Long or Long/Flat Formdrill.
14. Doesn't the material get work hardened?
This depends on the material and carbon content. In steel alloys there is almost never a problem. Stainless steel may harden
about 10-15%, this causes no problem for the tapping afterwards.
15. Where does the heat come from?
All heat is generated through friction. There is no additional heat source.
16. What is the maximum material thickness?
This depends on the Formdrill diameter and style. For the larger diameters the wall thickness can go upto 10-12mm.
17. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
18.what can you buy from us?
formdrill,thermal drill,friction drill,flow drill
19. why should you buy from us not from other suppliers?
Formdrill, 40 years experience, expert in thermal drill. Create your own inserts. The thermal drilling system for screw,
solder and welding application in thin metal work pieces with high-strength holes, can be used in most ferrous and
non-ferrous metals
20. what services can we provide?
Accepted Delivery Terms: FOB,CIF,Express Delivery；
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,Credit Card,PayPal,Cash;
Language Spoken:English,Chinese,German,French
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails:
>=1 Stück(e)
US 128.00
Kommentare
Willkommen bei unzuun Kommentaren! Bitte halten Sie die Gespräche höflich und thematisch. Um produktive und respektvolle Gespräche zu fördern,
Sie können Kommentare von unseren Community Managern sehen.
Melden Sie sich an, um zu posten
Melden Sie sich an, um weitere Kommentare anzuzeigen
Diese Inserate könnten Sie auchinteressieren.
Meo Machinery Co.LTD
China Made Steam Turbine Generator Set
Meo Machinery Co.LTD
Condensate Steam turbine generator set
Meo Machinery Co.LTD
Forged Pelton Water Turbine Wheel(runner) for hydro power plant modernization
Meo Machinery Co.LTD
wood pellet biomass electric generator gasifier for gas energy
Meo Machinery Co.LTD
Mini hydro Francis water turbine generator runner
Meo Machinery Co.LTD
DTEC industrial drive feedwater pump steam turbine
Meo Machinery Co.LTD
M206-261000A037 steam turbine Valve Stem use fro Donfgang units
Meo Machinery Co.LTD
small scale 100kw gasifier biomass gasification power generation . biomass electricity generator
Meo Machinery Co.LTD
less fuel consumption emergency biomass power generator plant
Meo Machinery Co.LTD
1000kw Coal Gasification Power Plant Equipment
Meo Machinery Co.LTD
Wind Mill
Meo Machinery Co.LTD