10A 12V/24V USB-5V/3A Solar Controller for Solar System Rtd-10A

Produktbeschreibung

10A 12V/24V LCD Display Solar Charge Controller for Solar Panel Battery with USB 5V/3A Rtd-10A

RTD-10A/RTD-20A/RTD-30A/RTD-40A

Y-SOLAR RTD-10A Solar Controller is Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection,with fully 4-stage PWM charge management&period;

Specification

MODEL	RTD-10A	RTD-20A		RTD-30A	RTD-2048		RTD-3048
Batt voltage	12V/24V auto				48V
Charge current	10A	20A		30A	20A		30A
Discharge current	10A	20A		30A	20A		30A
Max Solar input	<50V				<80V
Equalization	B01 sealed		B02 Gel			B03 flood
	14&period;4V		14&period;2V			14&period;6V
Float charge	13&period;7V(defaul,adjustable)
Discharge stop	10&period;7V(defaul,adjustable)
Discharge reconnect	12&period;6V(defaul,adjustable)
USB output	5V/3A
Self-consume	<10mA
Operating temperature	-35~+60 °C
Size/Weight	150&ast;78&ast;35mm /150g

Main Features

Application Method

Attention

Connection Order&colon;
Connect the battery with the controller&period;
Connect the solar panel with the controller&period;
Connect the load with the controller or inverter&period;
Disconnection order&colon;
Disconnect the solar panel&period;
Disconnect the battery&period;
Disconnect the load&period;
Precautions&colon;
please make sure connect your inverter with your battery
Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases&period;
Install the controller at the vertical plane&period;

General Pakage

Product List
RTD-10A Solar Controller	1 pcs
Instructions	1 pcs
Packaging Information
Size	9&period;00&ast;5&period;00&ast;3&period;00 / piece
Size	80cm&ast;35cm&ast;33cm / carton
Weight	0&period;17kg / piece
Weight	15kg / carton
Quantity	31piece / carton

Instructions

SAFETY INSTRUCTIONS

1&period;Make sure your battery has enough voltage for the controller to recognize the battery type before first installation&period;

2&period;The battery cable should be as short as possible to minimize loss&period;

3&period;The regulator is only suitable for lead acid batteries&colon; OPEN,AGM, GEL

it is not suited for nickel metal hydride, lithium ions or other batteries&period;

4&period;The charge regulator is only suitable for regulating solar modules&period; Never connect another charging source to the charge regulator&period;

PRODUCT FEATURES

1&period;Build-in industrial micro controller&period;

2&period;Big LCD display,with 5V USB charger

3&period; PWM charge management&period;

4&period;Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection&period;

5&period;Dual mosfet Reverse current protection ,low heat production&period;

SYSTEM CONNECTION

1&period;Connect the battery to the charge regulator - plus and minus&period;

2&period;Connect the photovoltaic module to the regulator - plus and minus&period;

3&period; Connect the consumer to the charge regulator - plus and minus&period;

The reverse order applies when deinstalling&excl;

An improper sequence order can damage the controller&excl;

Packing show

Lieferfähigkeit

Verpackung und Versand

Vorlaufzeit:

Hafen:

Verpackungsdetails:

>=1 Stück(e)

US 4.53-5.32

Kontakt

Kommentare

Willkommen bei unzuun Kommentaren! Bitte halten Sie die Gespräche höflich und thematisch. Um produktive und respektvolle Gespräche zu fördern, Sie können Kommentare von unseren Community Managern sehen.

>={ {

US {-{

Details anzeigen