12V 24V 15A Intelligent PWM Solar Charge Controller with USB
Produktbeschreibung
Fuctions:
Low-loss series of controller
PWM-controlled constant-voltage charging
Battery charging with automatic charging mode selection (float, boost, equal)
Automatically adjust to voltage level 12V/24V
Current-dependent load deactivation
Automatic load reactivation
Temperature compensation
Grounding on the plus side
Integrated self test (start voltage 17.0V)
Display
LEDs to display battery charge status
LEDs (red/green )to display function status
Electronic protection functions
Battery-overload protection
Deep-discharge protection
Automatic electronic fuse
Reverse-polarity protection at module input of the load and the battery connection
Reverse-polarity protection of the module
Good electromagnetic compatibility
Prevention of back current into the module
Integrated temperature compensation of the end-of-charge voltage (0ºC to +50ºC, factor -4mv/K/cell )
Specification
Solar Charge Controller / P/No. | SCG 1515 | |||
Max module input short circuit current at 50ºC | 15A | |||
Max load output current ay 50ºC | 15A | |||
Syetem voltage | 12V/24V | |||
Max. voltage of Solar collector | 47V DC | |||
Enclosure Protection class | IP 32 | |||
Ambient temperature allowed | -25ºC...+50ºC | |||
Temperature compensation | -4 mV/K/Zelle | |||
Thermal Protection | 85ºC | |||
Terminal size(fine/single wire) | 2.5mm² | |||
Weight | 170g | |||
Dimensions(L*W*H) | 130*88*39mm |
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails: