12V/24V 30A Solar Controller-Solar System with Light+Timer Control Ld-30b

1.Automatic Identification System Voltage, 12V/24V auto recognition.

2.Humanized LCD displaying and double button operation of man-machine interface.

3.Completed technical data for setup and modify.

4.High efficiency intelligent PWM 3stage charging

5.The load control mode can be selected, the timer function can be reset for street light at night.

6.Discharge capacity control

7.RS485 communication interface (optional)

8.Discharge Counter of Ampere Hour

9.Working Storage Function: record the total run time of system, record timers of error during running time, record times of full charged battery.

10.Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.

11.Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime. 

12.Roundly reverse connected protection.

13.Solar Panels, Battery, Solar Charge Controller positive poles are all connected together, adopting negative MOSFET in series control circuit.

 

Connection Order:

Instructions

Y-SOLAR 30A 40A 50A 60A PWM Solar Controller 12/24V Light Timer Control LD-30B/LD-40B/LD-50B/LD-60B

Y-SOLAR LD-30B/LD-40B/LD-50B/LD-60B is 30A 40A 50A 60A PWM Solar Controller Charge Regulator 12/24V Light Timer Control LD-30B/LD-40B/LD-50B/LD-60B Solar Charge Controller

Advantages:

Settable Parameter

RS485 communication interface (optional)

Working Storage Function

Roundly Reverse Connected Protection

Humanized LCD displaying

Load Light and Timer Control

Accurate Temperature Compensation

1. Automatic Identification System Voltage, 12V/24V auto recognition.2. Humanized LCD displaying and double button operation of man-machine interface.3. Completed technical data for setup and modify.4. High efficiency intelligent PWM 3stage charging5. The load control mode can be selected, the timer function can be reset for street light at night.6. Discharge capacity control7. RS485 communication interface (optional)8. Discharge Counter of Ampere Hour9. Working Storage Function: record the total run time of system, record timers of error during running time, record times of full charged battery.10. Reliable over voltage protection, short circuit protection, over load protection, overcharge protection, over-discharge protection.11. Accurate temperature compensation, correcting the charging and discharging voltage automatically, improving the battery lifetime.12. Roundly reverse connected protection.13. Solar Panels, Battery, Solar Charge Controller positive poles are all connected together, adopting negative MOSFET in series control circuit.LCD Display:

 

1.The default night display of controller: When the solar panel input voltage have been detected by controller less than sensor identification point voltage, this graphic symbol will be light.

2.The default daytime display of controller: When the solar panel input voltage have been detected by controller more than sensor identification point voltage, this graphic symbol will be light.

3.The indicator of PV array parameter: When the solar panels data was displaying, this graphic symbol will be light. For example the voltage of solar panel.

4.The indicator of battery parameter: When the battery parameter was displaying, this graphic symbol will be light. For example the voltage of battery, temperature of battery.

5.The indicator of load parameter: When the load parameter was displaying, this graphic symbol will be light.

6.System Voltage: When the LCD shows different system voltage, the controller will adjust the technical data automatically.

7.Numerical Display Area

8.Timer Setting Function

9.Switch Graphic Symbol.

10.Unit Symbol Value

11.Warning: When there is fault, this graphic symbol will be light.

12.The indicator of Load status: Load on,Load off.

13.The indicator of Output power: When the load terminal have output, this graphic symbol will be light.

14.The indicator of capacity of battery: When the battery was in different capacity, the strip-type will show.

15.The indicator of charge status: When the controller is charging, the symbol will be light, float charge will be flash, no charging no display.