12V/24V A20A Solar Power/Regulator with Light and Timer Control dB-20A

12V/24V A20A Solar Power/Regulator with Light and Timer Control DB-20A

 

DB-10A/DB-20A

10A daul battery Solar Charge Controller duo-battery charger controller 12V 24V EPSOLAR EPIP20-DB charger controller for RVs,Caravans and Boats. NOTES: For use with solar panels only.

Specification

Note: All the data is for 12V, for 24V, please use 2x.

Main Features
- Two battery charging eliminates the added cost of two separate solar charging systems.
- With battery type selection
- With charging priority setting
- Temperature compensation (option: Remote temperature senor & Local temperature senor)
- PWM charging, different frequency option.

Application Method

Attention

Connection Order:
Connect the battery with the controller.
Connect the solar panel with the controller.
Connect the load with the controller or inverter.
Disconnection order:
Disconnect the solar panel.
Disconnect the battery.
Disconnect the load.
Precautions:
please make sure connect your inverter with your battery
Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases.

Install the controller at the vertical plane.

Instructions

Package including:

1. 1pcs 10A dual battery charge controller
2. 1pcs user manuals.

 

10A 12V 24V DC EPIP20-DB Dual Battery Solar Charge Controller

1. Duo-battery Solar Charge Controller with Remote Meter.

 
For RVs, Caravans and Boats.
- 10Amp, 20Amp 12/24V auto-work.
- NOTES: For use with solar panels only.

 

2. Major feature:
- Two battery charging eliminates the added cost of two separate solar charging systems.
- With battery type selection
- With charging priority setting
- Temperature compensation (option: Remote temperature senor & Local temperature senor)
- PWM charging, different frequency option.

 

3. Protection:
- Over charging
- Short-circuit
- Reverse polarity
- Revert current to PV

 

4. Duo-Battery Controller Features:
- Microcontroller Control for Fully Intelligent System
- Utilizes Serial Mode PWM Control for Maximum Efficiency
- Suitable for both 12V and 24V Systems
- Temperature Compensation
- Digital LED Indicator Light
- Wide Temperature Working Range of -35c to 55c
- Automatically Switches between 2 Batteries
- Full Installation Instructions Included

 

5. Remote meter Features:
- Remote digital display for the 10Amp/20Amp Duo- Battery Solar Charge Controller.
- Ideal for monitoring and display current solar system status.
- Displays both solar voltage and battery voltage as well as charging current and load current.
- Shows Amp-Hour and Watt-Hour charge accumulation as well as percentage the batteries are charged.
- Easy to use and program and is ideal for a quick system check

Iamges: