1.5MW,2.0MW,2.5MW,3.0MW,5.0MW tower

The steel plate material of the tower body is Q345E, Q355NE\Q355ND hot-rolled low alloy plate, and the flange material is Q345E-Z35 integral forging. The tower body is composed of 3-6 sections.There is a safety platform in the tower barrel, and the top platform is connected with the engine room by a ladder.All towers with a height of more than 80 meters are designed and installed with elevators for personnel access.

Near the door of the tower barrel is the part with great stress, and there are some improvement measures to make it meet the strength and fatigue requirements of the part.

The tower tube door can effectively protect small animals from entering, and a limit switch is installed at the tower tube door. If someone enters, it can be monitored.

A safe and reliable twisted cable protection device is installed to prevent the cable from being worn when the fan is running and shaking, and a miniature maintenance platform is installed to ensure the safety of maintenance personnel.

A fireproof seal module is installed on the tower drum installation platform to eliminate the hidden danger of the fire source spreading to the engine room along the cable combustion.The gap between the inner wall of the platform and the tower barrel is installed with sealant to prevent small parts from falling from the gap.

The collapsible bottom platform is convenient for site construction and installation. The installation operation is simple and safe for personnel operation. After installation, the platform can be smooth and overall stable.