1.5MW,2.0MW,2.5MW wind power hub

COMMODITY MODEL:1.5MW,2.0MW,2.5MW wind power hub
Material: QT350-22,QT400-18
Weight(kg):5000-12000

Product introduction:
The hub is an important supporting part in the fan structure. The hub is connected with three blades to form a wind wheel. The wind wheel captures the wind energy and then transfers the wind energy to the generator shaft through the spindle.So the hub is a key component in capturing wind energy to generate electricity.The wheel hub is an important bearing component in the whole wind turbine. It must have sufficient stiffness and strength to ensure the normal operation of the turbine under various load conditions, as well as the safety of the turbine under adverse conditions.

Product feature:
The hub is connected to the wind turbine spindle by bolts, and at the same time is connected to the grouting bearing that installs the wind turbine blade, and the torque generated by the wind turbine blade is transmitted to the gearbox through the wind turbine spindle.The hub has a complex structure. The drive flange face is fixed connected with the external end face of the fan spindle through bolts. The three hubs with an Angle of degree are also connected with the blade's slurry bearing through bolts.All kinds of aerodynamic loads on the blades and the weight of the blades themselves are acted on the hub by slurry bearing.

Product Application：
In almost all onshore wind turbines, the hub is one of the indispensable components.