20AMP 12V/24V Lsolar Panel Battery Power Regulator CMP12-20A-LCD

20A12V 24V LCD display Auto Instructions Solar Panel Battery Regulator CMP12-20A-LCD
 
CMD series   2016 Solar Energy Products Solar charge controller 12V or 24V is widely use for economy solar home system. It is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries. CMD series 2016 Solar Energy Products Solar charge controller 12V or 24V  has intuitive battery voltage display, so the users can understand the working state of battery in time

Protection:
Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
 
Indicator LED
1.The Battery is being charged strongly when the Charge LED is lighting;Filckering means the battery is in floating charge Mode,if it`s off means charging stopped.
2.When the LOAD LED is lighting,it means there is output and load can work;if it`s off,there isn`t output and the load can`t work.
 
Introduction:
A solar charge controller is the controlling center of the PV battery in off-grid power system which makes use of solar cells array to protect your batteries from being over-charge and over-discharge, so the life span of it can be extended.
 
Features:
Functio  According to the voltage of battery, Solar charge controller will adjust the charging current and decide if to supply power to the loads.
1. Generally keep the battery on full voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from supplying power to solar panels during nights.
 
Output voltage:12V 24V auto switch
Max load current: ≤12A
Full charge cut:13.7V
Low voltage cut:10.5V
Temp ompensation:-3mv °C/cell
Zero Load Loses:≤20mA
Voltage Drop&colon;<160mv

Datasheet &colon;

Package including&colon;
1&period;  1PCS  10A solar controller
2   1 PCS   User'  manual
 
CMP12 CMP12&sol;24 10A 12V 24V Solar Charge Controller
Only For off-Grid PV Solar System&period;
For 12V Pv System&colon; 150W Solar Panel&comma;12V Lead-acid Battery&comma;21V for Max input Voltage
For 24V Pv System&colon; 300W Solar Panel&comma;24V Lead-acid Battery&comma;42V for Max input Voltage

Application Method
Solar Home System 



Connection Order&colon; 
1&period;Connect the battery with the controller&period; 
2&period;Connect the solar panel with the controller&period; 
3&period;Connect the load with the controller or inverter&period; 
Disconnection order&colon; 
1&period;Disconnect the solar panel&period; 
2&period;Disconnect the battery&period; 
3&period;Disconnect the load&period; 
Precautions&colon; 
1&period;please make sure connect your inverter with your battery 
2&period;Please avoid to install in the following environments wet&comma;dusty places or places with flammable and explosive gases&period; 
3&period;Install the controller at the vertical plane&period;