5.2W Mono Solar Cell for 300W/305W Solar Panel
5.2W Mono Solar Cell for 300W/305W Solar Panel
Produktbeschreibung
Flagsun's manufacturing covers the photovoltaic value chain from ingot casting and wafering through solar cell production and solar panel assembly.All the cell is with most strict quality standard in every production process .
Feature:
Performance and Quality
Industry-Leading Efficiency on P-type Monocrystalline and Multicrystalline Silicon Solar cell
Robust Reliability Performance for Potential Mudule Benefit Beyond 25 years
Compatible with Present Module Manufactureing Process
PID Resistant Confirmed by All Major Customers and testing Labs
100% In-line Optical and Electrical Inspection
Physical characteristics:
Dimension:156*156mm±0.5mm
Thickness:Wafer(si):200μm±20μm
Cell:240μm±40μm
Front:Silver bus bars;Dark blue/others silicon nitride anti reflection coating
Back:Silver/aluminum bus bars;Full-surface aluminum BSF
Data under standard testing conditions(STC):1000W/Sq.M, AM1.5, 25ºC
Electrical Characteristics
PACKAGE
Typical package for one carton contains 1,200 cells. The cells are sealed in cell box every 100 pcs.
Gross weight per unit carton shall be around 16.6 KG.
Solar Cell Production Line
Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight.
Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.
Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.
PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.
Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.
Feature:
Performance and Quality
Industry-Leading Efficiency on P-type Monocrystalline and Multicrystalline Silicon Solar cell
Robust Reliability Performance for Potential Mudule Benefit Beyond 25 years
Compatible with Present Module Manufactureing Process
PID Resistant Confirmed by All Major Customers and testing Labs
100% In-line Optical and Electrical Inspection
Physical characteristics:
Dimension:156*156mm±0.5mm
Thickness:Wafer(si):200μm±20μm
Cell:240μm±40μm
Front:Silver bus bars;Dark blue/others silicon nitride anti reflection coating
Back:Silver/aluminum bus bars;Full-surface aluminum BSF
Data under standard testing conditions(STC):1000W/Sq.M, AM1.5, 25ºC
Electrical Characteristics
| Efficiency (%) | 20.4 | 20.6 | 20.7 | 2080 | 2090 | 2100 |
| Pmax (W) | 4.984 | 5.033 | 5.057 | 5.082 | 5.106 | 5.131 |
| Voc (V) | 0.658 | 0.661 | 0.662 | 0.664 | 0.665 | 0.666 |
| Isc (A) | 9.595 | 9.646 | 9.671 | 9.697 | 9.772 | 9.784 |
| Vmp (V) | 0.547 | 0.549 | 0.550 | 0.551 | 0.552 | 0.553 |
| Imp (A) | 9.107 | 9.162 | 9.189 | 9.217 | 9.244 | 9.272 |
PACKAGE
Typical package for one carton contains 1,200 cells. The cells are sealed in cell box every 100 pcs.
Gross weight per unit carton shall be around 16.6 KG.
Solar Cell Production Line
Cleaning & Texturing: Wafers are cleaned with industrial soaps and form square-based pyramids also called texture. The texturization helps to reduce the reflection of sunlight.
Diffusion: Wafers that have been pre-droped with boron during the casting process are then given a negative(n-type) surface characteristic by diffusing them with a phosphorus source at high temperature, which in turn creats the negative/positive(n-p) junction.
Etching: Phosphorus diffuses not only into the desired wafer surface but also into the side and the opposite surface to form PN. This gives a shunt path between the cell front and rear. Removal of the path around the wafer edge/edge junction isolation is named etching.
PECVD: By PECVD equipment, the wafers are coated with anti-reflection coating(ARC). It's the blue silicion nitride film to reduce reflection and promote absorption of light.
Printing & Heating: it was adopted by printing paste with screen technology to print the electrodes of silicion solar, and form a good ohmic contact.
Testing & Sorting: It means classifying the cells according to their efficiency tested under the simulated sunlight.
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails:
Produktspezifikationen
- Type:
- Mono
>=1200 pieces
US 0.66
Kommentare
Willkommen bei unzuun Kommentaren! Bitte halten Sie die Gespräche höflich und thematisch. Um produktive und respektvolle Gespräche zu fördern,
Sie können Kommentare von unseren Community Managern sehen.
Melden Sie sich an, um zu posten
Melden Sie sich an, um weitere Kommentare anzuzeigen
Diese Inserate könnten Sie auchinteressieren.
Meo Machinery Co.LTD
indonesia coconut shell charcoal briquette buyers
Meo Machinery Co.LTD
Briquette Charcoal Compressed from High Quality Ingredients in Large Quantity
Meo Machinery Co.LTD
Hookah Shisha Coconut Shell Charcoal Coco Cube Charcoal
Meo Machinery Co.LTD
YKS wholesale price coconut shell cube charcoal for hookah shisha /BBQ
Meo Machinery Co.LTD
swift lite all kinds packing shisha/hookah charcoal
Meo Machinery Co.LTD
Barbecue Application Coconut Charcoal from Top Selling Vietnam Supplier to France Importers
Meo Machinery Co.LTD
FINEST GRADE 100% NATURAL COFFEE WOOD CHARCOAL/ BBQ CHARCOAL FROM TURKEY
Meo Machinery Co.LTD
2017 HOTSALE UAE shisha charcoal 22mm 27mm 33mm 35mm38mm 40mm
Meo Machinery Co.LTD
Vietnam natural Wood Charcoal (Longan, Eucalyptus, Mangrove, Coffee,... ) Cheap price 2021
Meo Machinery Co.LTD
100% Natural Coconut - High quality shisha charcoal 25x25x25 CUBE direct factory
Meo Machinery Co.LTD
coal hookah coconut shisha charcoal / BBQ charcoal High calorific charcoal
Meo Machinery Co.LTD