D6 Diesel Virgin Oil

Characteristics                            Units             Diesel Oil           Test Methods

Cetane Number                                                    Minimum 51.0   EN ISO 5165

Cetane index                                                         Minimum 46.0   EN ISO 4264

Density at15^o C                             Kg / M³         820to 845           EN ISO 3675 / EN ISO 12185

Polycyclic Aromatic Hydrocarbons

% m/m         Maximum 11      EN ISO 12916

Sulphur Content                            Mg / kg         Maximum 50      EN ISO 24260/ EN ISO 8754 / EN

     ISO 14596

Distillation                                                                                           EN ISO 3405

65 % Collected                               ^o C                   Minimum 250

80 % Collected                               ^o C                   -

85 % Collected                               ^o C                   Maximum 350

95 % Collected                               ^o C                   Maximum 360

Kinematic Viscosity at 40^o C      Mm ²/           2.00 to 4.50         EN ISO 3104 Flash Point                                      ^o C                   Higher than 55   EN ISO 22719 Cold Filter Plug point

Winter ( 1 October to 31 March )

Summer (1 April to 30

September)

o   C                   Maximum - 10

o   C                   Maximum 0

Haze Point                                                                                            ASTM 4 2500 / D5771 / D5772 /

D5773

Winter (1 October to 31 March)

Summer (1 April to 30

September)

Carbonaceous Residue

(Over 10 % at end of Distillation) Anti – Friction Property

o    C                   Maximum 0

o    C                   Maximum 6

% m/m         Maximum 0.30   EN ISO 10370

Mu                 Maximum 460    ISO 12156 –

(Corrected WSD 1.4) at 60 ^oC

Water and Sediments                   % V / V         -                             ASTM D 2709 Solid Particles                                Mg / kg         Maximum 24      EN 12662

Ash Content                                    % m / m       Maximum 0.01    EN ISO 6245

Corrosion to Copper (3h at 50 ^o

C)

ASTM

Scale

Maximum 1 b     EN ISO 2160