Domestic SMC Biogas Digester

Specification:

Thickness:0.5-1.3mm

Volume: 4m3   7m3  10m3

High gas production rate

Low cost

high strengthen

light weight

Aging-resistant, long(service) life

corrosion-resistant.

Advantages:

1. High gas production rate

FRP's thermal conductivity is 1.42kj/(m.h.), concrate thermal conductivity is 5.44kj/(m.h.) .so as the heat loss of FRP is less than concrate, that bring to large gas creating!

2. Low cost, suitable for convenient digging area, such as high groundwater table & bad ground place

3. Aging-resistant, long(service) life, it can be used by 30 years,corrosion resistant.

4. It has the advantages of high strengthen, light weight, convenient transportation .

5. The biogas tank has strong anti deformation ability and will not be squeezed by the frozen soil

6. The biogas tank is formed by winding, good sealing and leakage prevention

7. Biogas tank automatic discharge, easy to operate, easy to manage.

8. The building cycle is short, save time.

9. The mechanical property of tank is good, and it has certain elasticity.

For long years of be specific in our biogas tank manufacture, We have many unique design that other company may not have.

1. Ventilation between the inner membrane and outer membrane.

If there is few biogas in the air between, so we must ventilate. As we konw biogas are explosive gases, so it would be dangrous to let it be there

2. Dranage design between the inner membrane and outer membrane.

If there is temperature difference, it will form condensation water. Specially, in cold area, water will easily freeze, this will totally do harm to the storage system. So we have dranage system between the inner membrane and outer membrane.

3. Special designed inner membrane

We have taken advanced tension structure, which makes the inner membrane try to be as less folded as possible. This will greatly increase the lifespan of biogas tank.

Our Biogas Plant export to many regions and countries, including Asain, Middle East, South America, Africa.

Installation Steps:

1.Measure                   2. Dig a hole           3. Assemble the tank  

4. Fasten the tank         5.Put the tank         6.Water-test    

7.Arrange                     8.Refilling               9.Feeding Sealing  

10.Biogas generation

Contents:

1. It can store large amount of biogas.

2. The biogas tank is separated with fermentation cylinder, when goes in trouble, it will not influence the other.

3. We have designed 5 capacity IR detectors along the outer membrane instead of internal traditional ultrasonic detector.

   Researches and development team by knowing the importance of the FRP usage in industry and construction , have successfully conducting different researches and studies projects. At the present , it has several government- supported projects available .

   Design and engineering services has been given idea from customers, and make out the thinsg you imaged. Specially developing on new machinary.

Istallation and construction team is experienced with installation, commissioning and training service at cutomer’s factory. In this way, the customer is able to handle management of equipment themsleves soon.

   Mantiance service is applied when customer cann’t solve problem themselves. Mainly at equipment, software, tools…etc.

   Technical support is the most importance in production. as long as frp developing, new and advanced process, material, equipments appeared. We are giving the eyes on the world frp relatived news and supply customer advanced service.

   Shijiazhuang JHR Import & Export Co., Ltd. is a leading manufacturer of FRP relative products. Now we mainly focus on researching and developing FRP products production lines. At present, we can supply advanced FRP pipe and tank production line, pultrusion production line, and membrane housing production lines. We not only supply these equipment, but also supply processing technical support. Our 3-axis all-in-one filament winding machine is very popular in the world.

Q: Are you a trading company or a manufacture factory?

A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China

Q: Can your factory customize the machine for clients ?

A: Yes, we can.

Q: What is your payment terms ?

A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.

Q: How about after-sales service ?

A: 1 year free warranty, Lifetime technical service support.

Q: How can I install the production line and get a commissioning ?

A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.

Q:Have you some videos where we can see the line producing?

A: Yes, we can provide some videos