DTEC Overhaul Service for Light Gas Turbine Model Solar Taurus 60
DTEC Overhaul Service for Light Gas Turbine Model Solar Taurus 60
Produktbeschreibung
Product Description
Overhaul Service for Light Gas Turbine Model Solar Taurus 60
We can provide the overhaul service for the light gas turbine: Allison 501/T56, Spey, Avon, Olympus, LM1500, LM2500, Santurn20, Centaur40, Centaur50, Taurus60, Tautus70, Mrs90, Mars100, Titan130, SGT100, SGT200.
Progress in Maintenance of Light Gas Turbine
The factory is currently carrying out the maintenance of three light gas turbines, namely RR Allison 501-KB5, Solar Mars 100 and Solar Taurus 60.
(1) In January 2018, the factory formally cooperated with CNOOC, taking imported RR Allison 501-KB5 gas turbine as a breakthrough point, and for the first time in China, it started the construction of a domestic repair line for imported light gas turbines. In June, the factory completed the repair of all parts of Allison 501-KB5 gas turbine, the first (2 sets in total) and passed the user review. At the end of August, the gas turbine was completely refitted, and a trial run was carried out in early September. At present, the factory is carrying out secondary decomposition and troubleshooting after the trial run. It is planned to carry out a formal trial run in mid-October and hand it over to the user for use after the trial run is qualified. During this period, more than 10 research projects including remanufacturing and repair of compressor blades, turbine blades, combustion chambers and other key components were completed independently.
(2) Progress in repair of CNOOC Solar Mars 100 gas turbine: breakdown and troubleshooting have been completed, and the repair plan has passed the user review; Most of the component-level repairs including the first and second turbine rotor blades of the gas generator have been completed, and the first turbine rotor blades of the power turbine are being repaired. It is planned to complete the assembly of the gas turbine in mid-October.
(3) In cooperation with a domestic gas turbine plant, the decomposition and troubleshooting of the U.S. Solar Taurus 60 gas turbine is being carried out.
1. preparation of process documents Starting from March 2018, the factory officially started the preparation work for the repair of Allison 501-KB5 gas turbine. According to the "501 Gas Turbine Repair Quality Assurance Outline" and military aviation engine repair specifications, and in combination with the characteristics of Allison 501-KB5 gas turbine, the factory has compiled 47 repair process documents, including decomposition, troubleshooting, special process, repair, assembly, test run, etc., to achieve full coverage of all gas turbine parts.
II. the tooling equipment configuration We designed and manufactured 29 sets of equipment and 206 special tools.
III. Personnel Training All repair personnel for gas turbine products need to be trained and qualified, and 118 people have
obtained repair qualification licenses.
IV. Quality Control According to the requirements of "501 gas turbine repair plan" and "501 gas turbine repair quality assurance program", the factory has reviewed the trial repair process of 501 gas turbine, evaluated whether the process meets the requirements of the quality assurance program, and ensured that the repair work is strictly carried out in accordance with the
quality assurance program and factory procedure documents, is stable and controlled, and seeks for weak links and continuous improvement. A total of 52 problems and 11 suggestions were found in the audit and were rectified respectively.
The factory is currently carrying out the maintenance of three light gas turbines, namely RR Allison 501-KB5, Solar Mars 100 and Solar Taurus 60.
(1) In January 2018, the factory formally cooperated with CNOOC, taking imported RR Allison 501-KB5 gas turbine as a breakthrough point, and for the first time in China, it started the construction of a domestic repair line for imported light gas turbines. In June, the factory completed the repair of all parts of Allison 501-KB5 gas turbine, the first (2 sets in total) and passed the user review. At the end of August, the gas turbine was completely refitted, and a trial run was carried out in early September. At present, the factory is carrying out secondary decomposition and troubleshooting after the trial run. It is planned to carry out a formal trial run in mid-October and hand it over to the user for use after the trial run is qualified. During this period, more than 10 research projects including remanufacturing and repair of compressor blades, turbine blades, combustion chambers and other key components were completed independently.
(2) Progress in repair of CNOOC Solar Mars 100 gas turbine: breakdown and troubleshooting have been completed, and the repair plan has passed the user review; Most of the component-level repairs including the first and second turbine rotor blades of the gas generator have been completed, and the first turbine rotor blades of the power turbine are being repaired. It is planned to complete the assembly of the gas turbine in mid-October.
(3) In cooperation with a domestic gas turbine plant, the decomposition and troubleshooting of the U.S. Solar Taurus 60 gas turbine is being carried out.
1. preparation of process documents Starting from March 2018, the factory officially started the preparation work for the repair of Allison 501-KB5 gas turbine. According to the "501 Gas Turbine Repair Quality Assurance Outline" and military aviation engine repair specifications, and in combination with the characteristics of Allison 501-KB5 gas turbine, the factory has compiled 47 repair process documents, including decomposition, troubleshooting, special process, repair, assembly, test run, etc., to achieve full coverage of all gas turbine parts.
II. the tooling equipment configuration We designed and manufactured 29 sets of equipment and 206 special tools.
III. Personnel Training All repair personnel for gas turbine products need to be trained and qualified, and 118 people have
obtained repair qualification licenses.
IV. Quality Control According to the requirements of "501 gas turbine repair plan" and "501 gas turbine repair quality assurance program", the factory has reviewed the trial repair process of 501 gas turbine, evaluated whether the process meets the requirements of the quality assurance program, and ensured that the repair work is strictly carried out in accordance with the
quality assurance program and factory procedure documents, is stable and controlled, and seeks for weak links and continuous improvement. A total of 52 problems and 11 suggestions were found in the audit and were rectified respectively.
3.1 Allison 501-KB5 Repair/refurbishment
Components repair Over 80 parts of compressor unit, combustion chamber unit, turbine unit and accessory unit were decomposed, cleaned, inspected, repaired and tested, and over 10 research items on remanufacturing and repairing of key parts were completed.
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Company Profie
We, Dongturbo Electric Company Ltd.(DTEC). DTEC
is an international corporation, with its headquarter in Chengdu, China, and manufacturing bases in Deyang and Kunming, China, mainly engaged in the manufacturing of power & electric equipments, EPCC (engineering, procurement, construction, commissioning), and export and import business. DTEC also has branches and joint venture in Malaysia, Thailand, and Philippine. Our business scope covers EPC, supply equipment and materials for thermal power inc luding boiler, turbine, generator and their auxiliaries, BOP, electric and C& I etc.; EPC and equipment supply for PV, thermal solar power, Wind & PV hybrid and energy storage system.; spare parts supply and power plant overhaul and maintenance;
We have established close partner relationship with design institute, manufacturers, erection company, traders and end customers both in China and all over the world.
We actively and continuously engaged in the domestic and global electrical markets. Our professional Engineering, Project
Management etc. contributed to the success of the contracted projects, meanwhile, we also shared a lot from those success, we became one of the technical expertise for systematic solution for power industry.
is an international corporation, with its headquarter in Chengdu, China, and manufacturing bases in Deyang and Kunming, China, mainly engaged in the manufacturing of power & electric equipments, EPCC (engineering, procurement, construction, commissioning), and export and import business. DTEC also has branches and joint venture in Malaysia, Thailand, and Philippine. Our business scope covers EPC, supply equipment and materials for thermal power inc luding boiler, turbine, generator and their auxiliaries, BOP, electric and C& I etc.; EPC and equipment supply for PV, thermal solar power, Wind & PV hybrid and energy storage system.; spare parts supply and power plant overhaul and maintenance;
We have established close partner relationship with design institute, manufacturers, erection company, traders and end customers both in China and all over the world.
We actively and continuously engaged in the domestic and global electrical markets. Our professional Engineering, Project
Management etc. contributed to the success of the contracted projects, meanwhile, we also shared a lot from those success, we became one of the technical expertise for systematic solution for power industry.
FAQ
Q: How long is your delivery time?
A: Generally it is 15-25 days if the goods are in stock. Or it within 180days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples? Is it free or extra?
A: Sorry we do not offer samples.
Q: What is your term of payment?
A: Our payment term is T/T and L/C.
A: Generally it is 15-25 days if the goods are in stock. Or it within 180days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples? Is it free or extra?
A: Sorry we do not offer samples.
Q: What is your term of payment?
A: Our payment term is T/T and L/C.
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails:
>=1 Set(s)
US 112000.00-212000.00
Kommentare
Willkommen bei unzuun Kommentaren! Bitte halten Sie die Gespräche höflich und thematisch. Um produktive und respektvolle Gespräche zu fördern,
Sie können Kommentare von unseren Community Managern sehen.
Melden Sie sich an, um zu posten
Melden Sie sich an, um weitere Kommentare anzuzeigen
Diese Inserate könnten Sie auchinteressieren.
Meo Machinery Co.LTD
whole house solar power generator high capacity 500W 110v 230V off-grid portable power station
Meo Machinery Co.LTD
off grid power solar system 26KW 30kw price 30kw wind solar hybrid power system kit with battery backup
Meo Machinery Co.LTD
Factory direct mono panel solar 320w 330w 340w monocrystalline solar panel home system use
Meo Machinery Co.LTD
All in one Whole House 220V 5kwh 10kwh Solar Power Generator Running Solar Power System for Home solar lithium battery
Meo Machinery Co.LTD
110w flexible solar panel for RV camping boat super light solar panel thin film solar
Meo Machinery Co.LTD
Energy pressurized flat plate solar thermal collectors
Meo Machinery Co.LTD
Super Solar Best Price Thin Film Solar Energy System Panel Price in India
Meo Machinery Co.LTD
Factory price 50/60hz 2008*1002*40mm commercial storage battery solar panel
Meo Machinery Co.LTD
Longji solar 430 435 440 445 450 watts PERC 144 cell pv module wholesale price solarpanel 500 watt
Meo Machinery Co.LTD
CE TUV 100w 110w 120w 140w 150w 160w MONO Solar Panels
Meo Machinery Co.LTD
2020 new German technology jinko solar 250 watt photovoltaic solar panel
Meo Machinery Co.LTD