FRP SMC biogas / methane tank/FRP water treatment plant

Specification:

Thickness:0.5-1.3mm or customize

Volume: 4m3  ; 7m3  ;10m3 ; etc

High gas production rate

Low cost

high strengthen

light weight

Aging-resistant, long(service) life

corrosion-resistant.

Advantages:

1. High gas production rate

FRP's thermal conductivity is 1.42kj/(m.h.), concrate thermal conductivity is 5.44kj/(m.h.) .so as the heat loss of FRP is less than concrate, that bring to large gas creating!

2. Low cost, suitable for convenient digging area, such as high groundwater table & bad ground place

3. Aging-resistant, long(service) life, it can be used by 30 years,corrosion resistant.

4. It has the advantages of high strengthen, light weight, convenient transportation .

5. The biogas tank has strong anti deformation ability and will not be squeezed by the frozen soil

6. The biogas tank is formed by winding, good sealing and leakage prevention

7. Biogas tank automatic discharge, easy to operate, easy to manage.

8. The building cycle is short, save time.

9. The mechanical property of tank is good, and it has certain elasticity.

For long years of be specific in our biogas tank manufacture, We have many unique design that other company may not have.

1. Ventilation between the inner membrane and outer membrane.

If there is few biogas in the air between, so we must ventilate. As we konw biogas are explosive gases, so it would be dangrous to let it be there

2. Dranage design between the inner membrane and outer membrane.

If there is temperature difference, it will form condensation water. Specially, in cold area, water will easily freeze, this will totally do harm to the storage system. So we have dranage system between the inner membrane and outer membrane.

3. Special designed inner membrane

We have taken advanced tension structure, which makes the inner membrane try to be as less folded as possible. This will greatly increase the lifespan of biogas tank.

Our Biogas Plant export to many regions and countries, including Asain, Middle East, South America, Africa.

Installation Steps:

1.Measure                   2. Dig a hole           3. Assemble the tank  

4. Fasten the tank         5.Put the tank         6.Water-test    

7.Arrange                     8.Refilling               9.Feeding Sealing  

10.Biogas generation

Contents:

1. It can store large amount of biogas.

2. The biogas tank is separated with fermentation cylinder, when goes in trouble, it will not influence the other.

3. We have designed 5 capacity IR detectors along the outer membrane instead of internal traditional ultrasonic detector.

Q: Are you a trading company or a manufacture factory?

A: Our factory is one of the biggest FRP products, FRP machines manufacturer in China

Q: Can your factory customize the machine for clients ?

A: Yes, we can.

Q: What is your payment terms ?

A: Normally,50% as the deposit first by T/T, the rest 50% will be paid before shipping by T/T.

Q: How about after-sales service ?

A: 1 year free warranty, Lifetime technical service support.

Q: How can I install the production line and get a commissioning ?

A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.

Q:Have you some videos where we can see the line producing?

A: Yes, we can provide some videos