Good feedback Sawdust Coal/Charcoal Briquettes Making Machine/Charcoal Rod Machine with long burning time

    The carbon powder molding machine (referred to as the carbon rod machine) is a carbon rod molding device that uses the principle of screw extrusion to compress the prepared carbon powder into a predetermined shape with a certain strength.

    Carbon powder molding machine is one of the main equipment in the fuel molding section of the ammonia fertilizer and gas production system. It extrudes the fuel carbon powder into a certain strength round (or hexagonal or square) Carbon rods, a new process that is burned in the gas generator to replace the traditional process of burning lump coal and briquettes to make gas.

    The coal stick machine is a machine that makes powdered raw coal into strips of different shapes. Its working principle is: the electric motor transmits the power to the transmission through the V-belt, the transmission output shaft transmits the power to the propulsion shaft through the floating coupling, and the propeller on the propulsion shaft pushes the coal material out through the forming die to produce the ideal High pressure coal sticks.

1. Large feed screw lead, feed block, small advance screw lead, save power.

2. The shaft seat and the cylinder are rigidly connected, with high concentricity, anti-reverse thrust, and the machine is stable.

3. The part to be sealed adopts a fault structure, and the dirt leaks from the fault.

4. V-belt drive, stable operation, low noise, and at the same time play a role in overload protection.

5. The head and the cylinder are connected with a snap ring structure and a bolt structure, which can be customized according to user needs.

1.Design for production line flow and equipment layout freely according to the site.

2.Supply the foundation drawing of equipment.

3.Supply the technical parameters of peripheral equipment.

4.During the operation, we can offer the technology service freely if the user needs to adjust the layout and application.

5.During the operation, we only collect the cost if the user willing to upgrade the equipment when we have the advantage technology.

Contact:

Vorlaufzeit:

Hafen:

Verpackungsdetails: