MB-9HP-9G FULLY SYNTHETIC AUTOMATIC TRANSMISSION FLUID
Produktbeschreibung
HIGH PERFORMANCE SYNTHETIC AUTOMATIC TRANSMISSION FLUID
Description |
| VAPRO ATF MB 9-G Series is synthetic based oil with a special selection of additives and inhibitors that ensure the smooth functioning of automatic transmissions. VAPRO ATF MB 9-G Series is an ATF (Automatic Transmission Fluid) of the newest generation developed for all 9-gear automatic transmissions (9G-Tronic) of motor vehicles by Mercedes-Benz. Guarantees maximum wear protection in every operating state.
|
Application |
|
VAPRO ATF MB 9-G Series was developed for use in the newest 9G-Tronic automatic transmission of the Series W9A 700 by Mercedes-Benz. These are also known under the name NAG3 (New Automatic Transmission of the 3rd Generation) of the type 725.011. VAPRO ATF MB 9-G Series can also be used in aggregates with the specification MB 236.16 (A 001 989 92 03), since these were replaced by the new specification MB 236.17. VAPRO ATF MB 9-G Series must not be used in older Mercedes Benz 5 and 7-gear automatic transmission, which require automatic transmission oil according to the MB approval MB 236.10, 236.12, 236.14 or 236.15.
|
Performance Features and Benefits |
|
|
Specifications and approvals |
|
MB-Approval 236.17
|
* In Plastic Bottles 1 Liter and 4 Liters
* 24 x 1 L bottles in one carton box
* 6 x 4 L bottles in one carton box
* 18 L pail
* 200 L steel drum/barrel
* 560 to 600 cartons per one-20 ft container
We manufacture and supply genuine products manufactured using fresh virgin base oil.
We also manufacture for OEM brands.
1. What is your payment term?
We accept 30% TT as down payment and 70% TT before shipping. Downpayment must be received upon order confirmation. We will show you the photos of the products and packages before you pay the balance.
2. What is your delivery time?
In general, it will take 15 to 30 days after receiving the full payment. The actual delivery date will depend on the type of lubricant and the volume quantity of your order.
3. Do you manufacture for OEM brands?
Yes, we are already manufacturing for several OEM brands overseas. You must provide the art and design materials plus technical specifications if any, among other things.
4. Can I get samples?
Depending on the availability of the type of lubricant requested if in ready stock, we can provide a minimal amount of sample, however you must bear the cost of shipping by courier.
5. What type of packing available?
For automotive lubricants in small packs, in general, we pack in plastic bottles 1 liter and 4 liters volume. These bottles are then packed inside a carton box. If you require special pack such as metal can, it can also be done accordingly.
6. What are your delivery terms?
Choice of EXW, FOB, CFR and CIF
Lieferfähigkeit
Verpackung und Versand
- Vorlaufzeit:
- Hafen:
- Verpackungsdetails: