MPPT 12/24/36/48V 20/30/40/50/60A Solar Power Energy Panel Battery System Charger Solar Controller

Product name: 12V/24V/36V/48V 20A 30A 40A 50A 60A MPPT Solar Controller
Item no.: JS-ES-2420;JS-ES-2430;JS-ES-2440;JS-ES-2450;JS-ES-2460

MPPT highest technoogy, to ensure >95% charging efficency;
Voltage display;Big size crust:outside terminal to connect with different size wires;
With battery energy LED indicator;
Rated Voltage:12V/24/36V/48V;Input voltage:<150V;Rated Current:20A/30A/40A/50A/60A;
Battery Over-charge Protection; Battery Over-discharge Cut-off; Battery Over-discharge Resume;
External temperature compensation;Electronic load switch;Full intelligent MPPT charge control;
Charge and discharge parameter is adjustable, charge and discharge data Cumulative;
time control and light control function set up, full product protection from inside circuit and outside thunder

Specification:
Controller style: MPPT
solar panel input voltage: 16V-150V(normal 18V,36V,48V,72V)
controller output voltage:12V,24V,36V,48V
Rated Current:20A;30A;40A;50A;60A
Battery Over-charge Protection:14.4V/28.8V/57.6 DC;
Battery Over-discharge Cut-off:10.8V/21.6V/43.2 DC;
Battery Over-discharge Resume:12.6V/25.2V/50.4 DC;
Over-loading protection,short-circuit protection, thunder protection,low-voltage protection, over-charge/discharge protection


Function and Usage:
Six terminals:
Two for solar panel input + -
Two for battery input + -
Two for loading onput + -

Connection:
solar panel connect with controller by "solar panel input" terminals
battery connect with controller by "battery input" terminals
loading connect with controller by "loading output" terminals

Function:
1. Keeping solar panel on charging in reasonable way;
2. Protecting battery from destroy in charging and discharging.

Package:
1. Package including
controller: 1pc
Instruction+warranty card: 1pc

2. Package data
N.W/G.W: 2.3/3KGS
Product size: 240*168*66mm;
Packing Size: 289*204*101mm;
1pc/color box, 10pcs/carton

Remarks:
solar panel optional:Less than 18V/720W, 36V/1440W, 72V/2880W
battery optional: All
Loading voltage:12V, 24V,36V,48V
Warranty:
3 years
Agent Support: Company Overseas Department
Brand support: Company Brand Department
After-sale Service: Company After-sale Service Center

Usage:
Take solar panel under sunlight, the energy is stored in battery system box, Loading works by getting power from battery system box, the controller control this process

Advantage:
Crust: Flame retardant
PCB: all component are the best quality, each main parts are manufactured by our company,
quality controlled and finished product tested
   

Reference photos:












The product is used to control Solar Panel and battery in Solar System automatically.
Here is the Solar Panel Configuration list with different rated voltage (6V,12V,24V,48V,72V,96V,216V)
. FUCTION:
  1. Over-load protection
  2. Short circuit protection
  3. Reverse discharging protection
  4. Reverse-polarity protection
  5. Over-charging protection
. CONNECTION (AS INDICATED IN DIAGRAM):
Open the top cover of controller and connect the wire with terminals follow the diagram on the top cover of it.
1. Connect the "+", "-" Poles of the battery to the corresponding ports of controller (the third and the fourth one from left).
* Load indicator (load) flash once and after 15 seconds will light up, said connected correctly, can proceed the following connection. Otherwise it will damage the controller.
2. Connect the "+", "-" poles of the solar panel to the corresponding ports of controller (the first and the second one from left).
* If a connection error can damage your controller.
3. Connect the "+", "-" poles of the load to the corresponding ports of controller (the fifth and the sixth one from left).
. INDICATOR LED
1. Charge LED is used to indicate the charging status of battery. Lighting is in-charging mode, flickering is floating charge mode. LED turn off means charging stopped.
2. There is output and load can work if the Load LED is lighting. There isn't output and the load cannot work if Load LED off.
Notice:
1. Please make sure the rated voltage of solar panels, batteries the loads are the same. All of them should be 6V,12V,24V,48V,72V,96V,216V.
2. The rated current of solar panels and load must be less than the rated current of controller.
The specifications: Error of 2%  
Parameters may customized by customers